Edelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Notes- Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
Documents
Attributes
Grade Type: | Performance |
Single Or Dual Plane Type: | Dual |
Front Maximum Height: | 3.740 IN |
Rear Maximum Height: | 4.800 IN |
Center Maximum Height: | 4.270 IN |
Vehicle Model: | Chevrolet |
Basic Operating RPM Range: | Idle-5500 R3 |
Flange Type: | 4150 |
Finish: | Satin |
RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Series: | Performer |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00085347027019Package Bar Code:00085347027019Weight Variance:0.000000000Stacking Factor:0Inner Quantity:1 Each
Extended Information
Core Return Days to Expiry:0Country of Origin (Primary):USEmission Code:Not in CAHarmonized Tariff Code (HTS):8708996800Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:1NAFTA Preference Criterion Code:Criteria BNational Popularity Code:Top 60% of Product Group Sales Value (Units x $, Hits, etc.)National Popularity Description:Top 60% of Product Group Sales Value (Units x $, Hits, etc.)Pallet Layer Maximum:8Refurbished Part:NoRemanufactured Part:NoTaxable:YesWarranty Time:12Warranty Time UOM:Month
Edelbrock
Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.
Edelbrock Corporation has six locations: Three in Torrance California, two in San Jacinto, California, and one in Sanford North Carolina totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support. Less than a mile away is Russell Plumbing and our Distribution Center.
Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of our commitment to "Made in USA" products and performance.
Edelbrock products start with an original thought or idea that then has to be translated into a working model. Our R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts. Why is being an enthusiast so important? Because an enthusiast does more than work in the automotive aftermarket, they live it - and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature. They are constantly thinking of new and innovative ways of making a product that works better.
Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered, manufactured, and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.
Founded in 1938, Torrance-based Edelbrock, LLC. is recognized as one of the nation's premier designers, manufacturers and distributors of performance replacement parts for the automotive aftermarket.